New RD45F HydraFlex™ Draper

Specifications

Compare >>> Select up to 2 models to compare specifications

John DeereRD45F HydraFlex™ Draper

Add Model --Please Select-- RD30F (Model year 2022) RD35F (Model year 2022) RD40F (Model year 2022)

Add Model --Please Select-- RD30F (Model year 2022) RD35F (Model year 2022) RD40F (Model year 2022)

Cutterbar length	13.72 m 45 ft
Knife drive	Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in.
Knife speed	X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Pickup reel operating speeds	6-70 rpm
Draper belts speed control	Hydraulic from cab (side belts only)

Type	Rigid frame flexible cutterbar

Type	Straight-line knife drive system Cutterbar vertical flex: 190 mm 7.5 in.
Length	13.72 m 45 ft
Knife drive	Double-cut, dual-drive, shaft-driven cutterbar: 10.2 cm 4 in.
Knife speed	X Series Combine: 520 cycles/min S-Series Combine: 490 cycles/min
Cutterbar tilt
Base skid shoe height	3.8 cm 1.5 in.

General	Two-piece, poly tine pickup reel with 8-in. (20-cm) tube
Number of slats	Six bat poly
Fingers	Nylon
Diameter	106.7 cm 42 in.
Height control	Hydraulic
Speed control	Hydraulic
Reel lift	72 cm 28.3 in.
Reel fore and aft	35.9 cm 14.1 in.
Fore of the cutterbar	40.6 cm 16 in.
Reel resume	Base
Reel reverse	Base
Operating speeds	6-70 rpm
Operating speeds (54-in. reel)

Number of slats
Diameter
Height control
Speed control
Operating speeds

Width	Side belts: 101.6 cm 40 in. Center belts: 177.6 cm 70 in.
Belt depth	101.2 cm 39.8 in.
Cleat height	19.05 mm 0.75 in.
Operating speed	Side belts (variable): 1-3.5 m/s 3.3-11.5 fps Center belts: 211 m/min 692 fpm Low-speed center belt (fixed): 4.2 m/s 13.8 fps High-speed center belt (fixed): 5.1 m/s 16.7 fps
Speed control	Hydraulic from cab (side belts only)
Center belt reverse	Base

Diameter	414 mm 16.3 in.
Feed drum fingers	Heavy-duty and round with breakaway notch and retainer Diameter: 16 mm 0.625 in.
Number of fingers	21
Auger finger platform	Triple chevron, retracting
Finger reach	152 mm 6 in.
Drum/auger reverse	Base
Operating speed	Low speed: 200 rpm High speed: 240 rpm
Center cleanout door	Base

Type	Electrohydraulic
Header height sensing on the ground	Base
Header height sensing off the ground	Optional: four sensors

Type	Optional: hydraulic drive
Fingered augers
Size	45.7 cm 18 in.

Platform length	14.6 m 47.9 ft
Overall operating depth	With dividers: 2.74 m 9 ft
Transport width, field position	14.6 m 47.9 ft
Transport width on wheel, less dividers
Transport length, hitch extended

Approximate weight	4437 kg 9782 lb

Date collected	15 June 2020